Description

Steel Plate Swing beam shear machine Sheet metal NC hydraulic shearing machine

Hydraulic Swing Beam Shear QC12K 6x3200 with E21s NC System

1.Totally EU streamlined design,Monoblock by welding robots & aparatus and stress relief process by Annealing treatment.

2.Adopt integrated hydraulic system, more reliable and easy for maintenance.and the hydraulic system from Bosch-Rexroth,Germany,

3.The Hydraulic Guillotine is a Swing Beam Action machine which is produced in a variety of cutting lengths and capacity.

4.The distance of the backgauge is adjusted by the motor and is well adjustment is displayed by E21with Delta inverter.

5.Equipped with lighting-alignment, so as to align when shearing. The stroke of knife beam can be adjusted in stepless mode.

6.Safe fence and the electric inter locker have been designed for the machine to ensure the operation safety to CE regulation.

Estun E21sNC controlSystem
PoweredBack gaugeX-axis
DELTAInvertercontrolled back gauge
HIWIN Ball screws & Polished rodwith 0,02mm accuracy.
Squaring Arm and Front Support Arms
Germany Bosch-Rexroth Hydraulicor USA Sunny.
Germany EMB Tubing connector
Germany Siemens Main Motor
Telemecanique/SchneiderElectrics
Hydraulic &Electrical overload protection
Cutting Line Illumination and wire for shadow line cutting
Top blade with two cutting edges and bottom blade with four cutting edges.(6CrW2Si)

1.EN 12622:2009 + A1:2013 2.EN ISO 12100:2010 3.EN 60204-1:2006+A1:2009

Main Configuration：

Serial No.	Part Description	Brief instruction/ Orignal	Other
1-	NC Control system	■E21s NC System□E10s NC System
2-	Electrical components	Schneider Electrical from French	Travel switch & Limit switch
3-	Main Motor	Siemens from Germany Brand
4-	BackGauge & RAM Drive	Inverter from Taiwan delta	Accurate positioning control
5-	Foot switch	KACON from South Korea
6-	Hydraulic System	Bosch-Rexroth form Germany
Sealing Element		PARKER from U.S.A Brand
7-	Tubing connector	EMB form Germany Brand
8-	Ball screw/ Polished rod	HIWIN from TaiWan Brand
2.Equipment
1-	Pneumatic sheet support system		□Yes■No
2-	Rear sheet sliding plates		■Yes □No	Fixed type(metal)
3-	Angle Gauge		□Yes■No
4-	Squaring Arm(800mm)		■Yes □No
5-	Inverter accurate control		■Yes □No
6-	Light curtains for finger Protection		□Yes■No	Reset button
7-	Back safety Sensors		□Yes■No
8-	Back metal fence Safety		■Yes □No
9-	Safety standards		■CE □CSA □NR-12 □OSHA