How to use and maintain CNC hydraulic profile bending machine section angle steel bending machine
As a continuous production CNC hydraulic profile bending machine, the CNC hydraulic profile bending machine has to bear various dynamic loads from the day it is put into production. Each part is worn due to working transmission, corrosion by molten material and decomposed gas, environmental pollution and Due to the influence of mistakes in operation methods, after working for a period of time, the performance and efficiency of the equipment will change or decrease slightly.
The daily maintenance of the CNC hydraulic profile bending machine refers to the maintenance and inspection of the aluminum profile extrusion machine by the operator of each production shift during the normal production of the aluminum profile extrusion machine. Such as adding lubricating oil to the equipment after taking over, tightening the loose nuts, scrubbing the oil stains on the equipment, etc. In order to prolong its service life and improve its work efficiency, the daily maintenance of CNC hydraulic profile bending machine is very important. During its daily maintenance, we need to pay attention to the following points:
- CNC hydraulic profile bending machine section angle steel bending machine Fixing inspection of bolts and nuts
The combination of bolts and nuts is the most commonly used fixing method, and looseness is the fatal injury of the machine. Although it has been properly fixed during debugging, it is inevitable that it will loosen during use. Especially in places with high pressure or large temperature difference, loosening is more likely to occur. Therefore, in case of looseness, it should be dealt with immediately, otherwise it will cause oil leakage, center deviation, or even bigger accidents. Therefore, the tightness of all screws must be checked again after the machine is running, and the regular inspection items must be introduced.
Second, the machine work center line inspection
Die center deviation: cause extrusion deviation, uneven discharge, and affect product quality.
The deviation of the center of the ingot cylinder: not only the above phenomenon occurs, but also the extrusion rod is broken.
The center deviation of the extrusion rod: the light ones will accelerate the loss of the copper sleeve and the slide rail due to the uneven force, and the heavy ones will hit the manipulator or break the extrusion rod, causing major accidents.
- CNC hydraulic profile bending machine section angle steel bending machine Cleaning and lubrication
Keeping the surface of the machine clean not only keeps the appearance beautiful, but also is part of the daily maintenance of the CNC hydraulic profile bending machine. Especially for the sliding motion part, it is necessary to pay attention to cleaning and maintenance. For example, if the surface adheres to the dirt, the contact surface will be damaged and the service life will be reduced.
Fourth, CNC hydraulic profile bending machine section angle steel bending machine block clearing
The air filter and the pump suction filter may become clogged with dirt after long-term use. Abnormalities will occur after the blockage, such as malfunctioning action, abnormal sound from the pump, etc. Therefore, once a blockage occurs, it should be dealt with immediately to avoid other failures.
- Hydraulic oil management and maintenance
Hydraulic oil is very important to the extruder. Hydraulic oil with excessive pollution, excessive impurities and improper viscosity is the nemesis of hydraulic components. Therefore, it is very important to check the hydraulic oil regularly, filter and replace it.
These tasks are also part of the operating procedures of the CNC hydraulic profile bending machine. Therefore, for the CNC hydraulic profile bending machine operator, it is necessary to carefully implement the operating procedures and operate according to the production operation sequence required by the CNC hydraulic profile bending machine. better maintenance. The proper use of the extruder can give full play to the performance of the machine, maintain a good working condition and prolong the service life of the machine.
The use of CNC hydraulic profile bending machine includes a series of links such as installation, adjustment, commissioning, operation, maintenance and repair of the machine. However, the working system of the CNC hydraulic profile bending machine is the extrusion system, but it has unique characteristics, and special attention should be paid to its characteristics when using the CNC hydraulic profile bending machine.
