Five factors affecting the precision of cnc metal tube pipe bending machine
How many cnc metal tube pipe bending machines are there, and why some are cheap and some are very expensive. In fact, there are only three types of cnc metal tube pipe bending machines: automatic cnc metal tube pipe bending machine, hydraulic cnc metal tube pipe bending machine and CNC cnc metal tube pipe bending machine. The price of different models will vary greatly. Among them, the fully automatic bending machine is purely electric, which can be driven by a motor, a transmission, and a gear to develop the chain; while the hydraulic bending machine is to decompose the bending action technology, and use the traditional hydraulic transmission method to clamp the clamp and bend the pipe. Retraction, auxiliary advance and auxiliary retreat, core advance and core retreat, etc. This article discusses what factors affect the accuracy of the automatic cnc metal tube pipe bending machine.
- Thickness and roughness of the material
A material sheet suitable for laser cutting that is suitable for self-cutting, carbon steel with a thickness of less than 12mm and stainless steel with a thickness of less than 6mm, the quality of processing and production can be significantly improved, and the efficiency is also guaranteed. The surface roughness of the material during cutting also determines the quality of the cutting. Generally, the material is smoother, and the better the incision is.
- The power and working method of the cnc metal tube pipe bending machine
Through the analysis and research methods, it is proved that the greater the power of the CNC cnc metal tube pipe bending machine, even if the plate cutting technology is the same, the effect will be better than what we usually say. To a certain extent, it is better to cooperate with the laser cutting pattern material.
Automatic cnc metal tube pipe bending machine
- Focus position
The focus of the beam through the cutting machine can be aligned, and the precision and accuracy of the cutting machine can truly meet the requirements of its own expectations.
- Cutting speed
In fact, no matter what kind of material, the cutting speed can be matched with the material, so the cutting effect at this time is better, too fast or too slow will have an impact on laser cutting.
- Sub-air pressure and sub-air pressure
The higher the secondary gas pressure, the higher the gas purity, and the impurities attached to the secondary gas will be slightly smoother. For general enterprises, the oxygen cutting speed is fast, the nitrogen cutting technology is effective, and the cost is low. Different effects when the air gap is narrowed.
